// Copyright (c) 2014 Qualcomm Atheros, Inc. All rights reserved. // $ATH_LICENSE_HW_HDR_C$ // // DO NOT EDIT! This file is automatically generated // These definitions are tied to a particular hardware layout #ifndef _VHT_SIG_B_MU80_H_ #define _VHT_SIG_B_MU80_H_ #if !defined(__ASSEMBLER__) #endif // ################ START SUMMARY ################# // // Dword Fields // 0 length[18:0], mcs[22:19], tail[28:23], reserved_0[31:29] // 1 length_copy_a[18:0], mcs_copy_a[22:19], tail_copy_a[28:23], user_number_1[31:29] // 2 length_copy_b[18:0], mcs_copy_b[22:19], tail_copy_b[28:23], mu_user_number[31:29] // 3 length_copy_c[18:0], mcs_copy_c[22:19], tail_copy_c[28:23], user_number[31:29] // // ################ END SUMMARY ################# #define NUM_OF_DWORDS_VHT_SIG_B_MU80 4 struct vht_sig_b_mu80 { volatile uint32_t length : 19, //[18:0] mcs : 4, //[22:19] tail : 6, //[28:23] reserved_0 : 3; //[31:29] volatile uint32_t length_copy_a : 19, //[18:0] mcs_copy_a : 4, //[22:19] tail_copy_a : 6, //[28:23] user_number_1 : 3; //[31:29] volatile uint32_t length_copy_b : 19, //[18:0] mcs_copy_b : 4, //[22:19] tail_copy_b : 6, //[28:23] mu_user_number : 3; //[31:29] volatile uint32_t length_copy_c : 19, //[18:0] mcs_copy_c : 4, //[22:19] tail_copy_c : 6, //[28:23] user_number : 3; //[31:29] }; /* length VHT-SIG-B Length (in units of 4 octets) = ceiling (LENGTH/4) mcs Modulation as described in vht_sig_a mcs field tail Used to terminate the trellis of the convolutional decoder. Set to 0. reserved_0 Not part of VHT-SIG-B. Reserved: Set to 0 and ignored on receive length_copy_a Same as length. This field is not valid for RX packets mcs_copy_a Same as mcs. This field is not valid for RX packets tail_copy_a Same as tail. This field is not valid for RX packets user_number_1 Not part of VHT-SIG-B. Defines which user hardware this SIG-B word corresponds to during MU transmission. For MU packet reception, this field shall indicate the MU user number decoded by the PHY (for diagnostic purposes). length_copy_b Same as length. This field is not valid for RX packets. mcs_copy_b Same as mcs. This field is not valid for RX packets. tail_copy_b Same as tail. This field is not valid for RX packets. mu_user_number Not part of VHT-SIG-B. Mapping from user number (BFer hardware specific) to mu_user_number. The reader is directed to the previous chapter (User Number) for a definition of the terms user and mu_user. length_copy_c Same as length. This field is not valid for RX packets. mcs_copy_c Same as mcs. This field is not valid for RX packets. tail_copy_c Same as tail. This field is not valid for RX packets. user_number Not part of VHT-SIG-B. Defines which user hardware this SIG-B word corresponds to during MU transmission. For MU packet reception, this field shall indicate the MU user number decoded by the PHY (for diagnostic purposes). */ /* Description VHT_SIG_B_MU80_0_LENGTH VHT-SIG-B Length (in units of 4 octets) = ceiling (LENGTH/4) */ #define VHT_SIG_B_MU80_0_LENGTH_OFFSET 0x00000000 #define VHT_SIG_B_MU80_0_LENGTH_LSB 0 #define VHT_SIG_B_MU80_0_LENGTH_MASK 0x0007ffff /* Description VHT_SIG_B_MU80_0_MCS Modulation as described in vht_sig_a mcs field */ #define VHT_SIG_B_MU80_0_MCS_OFFSET 0x00000000 #define VHT_SIG_B_MU80_0_MCS_LSB 19 #define VHT_SIG_B_MU80_0_MCS_MASK 0x00780000 /* Description VHT_SIG_B_MU80_0_TAIL Used to terminate the trellis of the convolutional decoder. Set to 0. */ #define VHT_SIG_B_MU80_0_TAIL_OFFSET 0x00000000 #define VHT_SIG_B_MU80_0_TAIL_LSB 23 #define VHT_SIG_B_MU80_0_TAIL_MASK 0x1f800000 /* Description VHT_SIG_B_MU80_0_RESERVED_0 Not part of VHT-SIG-B. Reserved: Set to 0 and ignored on receive */ #define VHT_SIG_B_MU80_0_RESERVED_0_OFFSET 0x00000000 #define VHT_SIG_B_MU80_0_RESERVED_0_LSB 29 #define VHT_SIG_B_MU80_0_RESERVED_0_MASK 0xe0000000 /* Description VHT_SIG_B_MU80_1_LENGTH_COPY_A Same as length. This field is not valid for RX packets */ #define VHT_SIG_B_MU80_1_LENGTH_COPY_A_OFFSET 0x00000004 #define VHT_SIG_B_MU80_1_LENGTH_COPY_A_LSB 0 #define VHT_SIG_B_MU80_1_LENGTH_COPY_A_MASK 0x0007ffff /* Description VHT_SIG_B_MU80_1_MCS_COPY_A Same as mcs. This field is not valid for RX packets */ #define VHT_SIG_B_MU80_1_MCS_COPY_A_OFFSET 0x00000004 #define VHT_SIG_B_MU80_1_MCS_COPY_A_LSB 19 #define VHT_SIG_B_MU80_1_MCS_COPY_A_MASK 0x00780000 /* Description VHT_SIG_B_MU80_1_TAIL_COPY_A Same as tail. This field is not valid for RX packets */ #define VHT_SIG_B_MU80_1_TAIL_COPY_A_OFFSET 0x00000004 #define VHT_SIG_B_MU80_1_TAIL_COPY_A_LSB 23 #define VHT_SIG_B_MU80_1_TAIL_COPY_A_MASK 0x1f800000 /* Description VHT_SIG_B_MU80_1_USER_NUMBER_1 Not part of VHT-SIG-B. Defines which user hardware this SIG-B word corresponds to during MU transmission. For MU packet reception, this field shall indicate the MU user number decoded by the PHY (for diagnostic purposes). */ #define VHT_SIG_B_MU80_1_USER_NUMBER_1_OFFSET 0x00000004 #define VHT_SIG_B_MU80_1_USER_NUMBER_1_LSB 29 #define VHT_SIG_B_MU80_1_USER_NUMBER_1_MASK 0xe0000000 /* Description VHT_SIG_B_MU80_2_LENGTH_COPY_B Same as length. This field is not valid for RX packets. */ #define VHT_SIG_B_MU80_2_LENGTH_COPY_B_OFFSET 0x00000008 #define VHT_SIG_B_MU80_2_LENGTH_COPY_B_LSB 0 #define VHT_SIG_B_MU80_2_LENGTH_COPY_B_MASK 0x0007ffff /* Description VHT_SIG_B_MU80_2_MCS_COPY_B Same as mcs. This field is not valid for RX packets. */ #define VHT_SIG_B_MU80_2_MCS_COPY_B_OFFSET 0x00000008 #define VHT_SIG_B_MU80_2_MCS_COPY_B_LSB 19 #define VHT_SIG_B_MU80_2_MCS_COPY_B_MASK 0x00780000 /* Description VHT_SIG_B_MU80_2_TAIL_COPY_B Same as tail. This field is not valid for RX packets. */ #define VHT_SIG_B_MU80_2_TAIL_COPY_B_OFFSET 0x00000008 #define VHT_SIG_B_MU80_2_TAIL_COPY_B_LSB 23 #define VHT_SIG_B_MU80_2_TAIL_COPY_B_MASK 0x1f800000 /* Description VHT_SIG_B_MU80_2_MU_USER_NUMBER Not part of VHT-SIG-B. Mapping from user number (BFer hardware specific) to mu_user_number. The reader is directed to the previous chapter (User Number) for a definition of the terms user and mu_user. */ #define VHT_SIG_B_MU80_2_MU_USER_NUMBER_OFFSET 0x00000008 #define VHT_SIG_B_MU80_2_MU_USER_NUMBER_LSB 29 #define VHT_SIG_B_MU80_2_MU_USER_NUMBER_MASK 0xe0000000 /* Description VHT_SIG_B_MU80_3_LENGTH_COPY_C Same as length. This field is not valid for RX packets. */ #define VHT_SIG_B_MU80_3_LENGTH_COPY_C_OFFSET 0x0000000c #define VHT_SIG_B_MU80_3_LENGTH_COPY_C_LSB 0 #define VHT_SIG_B_MU80_3_LENGTH_COPY_C_MASK 0x0007ffff /* Description VHT_SIG_B_MU80_3_MCS_COPY_C Same as mcs. This field is not valid for RX packets. */ #define VHT_SIG_B_MU80_3_MCS_COPY_C_OFFSET 0x0000000c #define VHT_SIG_B_MU80_3_MCS_COPY_C_LSB 19 #define VHT_SIG_B_MU80_3_MCS_COPY_C_MASK 0x00780000 /* Description VHT_SIG_B_MU80_3_TAIL_COPY_C Same as tail. This field is not valid for RX packets. */ #define VHT_SIG_B_MU80_3_TAIL_COPY_C_OFFSET 0x0000000c #define VHT_SIG_B_MU80_3_TAIL_COPY_C_LSB 23 #define VHT_SIG_B_MU80_3_TAIL_COPY_C_MASK 0x1f800000 /* Description VHT_SIG_B_MU80_3_USER_NUMBER Not part of VHT-SIG-B. Defines which user hardware this SIG-B word corresponds to during MU transmission. For MU packet reception, this field shall indicate the MU user number decoded by the PHY (for diagnostic purposes). */ #define VHT_SIG_B_MU80_3_USER_NUMBER_OFFSET 0x0000000c #define VHT_SIG_B_MU80_3_USER_NUMBER_LSB 29 #define VHT_SIG_B_MU80_3_USER_NUMBER_MASK 0xe0000000 #endif // _VHT_SIG_B_MU80_H_