// Copyright (c) 2014 Qualcomm Atheros, Inc. All rights reserved. // $ATH_LICENSE_HW_HDR_C$ // // DO NOT EDIT! This file is automatically generated // These definitions are tied to a particular hardware layout #ifndef _RX_RSSI_LEGACY_H_ #define _RX_RSSI_LEGACY_H_ #if !defined(__ASSEMBLER__) #endif // ################ START SUMMARY ################# // // Dword Fields // 0 rssi_pri_chain0[7:0], rssi_sec20_chain0[15:8], rssi_sec40_chain0[23:16], rssi_sec80_chain0[31:24] // 1 rssi_pri_chain1[7:0], rssi_sec20_chain1[15:8], rssi_sec40_chain1[23:16], rssi_sec80_chain1[31:24] // 2 rssi_pri_chain2[7:0], rssi_sec20_chain2[15:8], rssi_sec40_chain2[23:16], rssi_sec80_chain2[31:24] // 3 rssi_pri_chain3[7:0], rssi_sec20_chain3[15:8], rssi_sec40_chain3[23:16], rssi_sec80_chain3[31:24] // 4 rssi_comb[7:0], bandwidth[9:8], reserved[31:10] // // ################ END SUMMARY ################# #define NUM_OF_DWORDS_RX_RSSI_LEGACY 5 struct rx_rssi_legacy { volatile uint32_t rssi_pri_chain0 : 8, //[7:0] rssi_sec20_chain0 : 8, //[15:8] rssi_sec40_chain0 : 8, //[23:16] rssi_sec80_chain0 : 8; //[31:24] volatile uint32_t rssi_pri_chain1 : 8, //[7:0] rssi_sec20_chain1 : 8, //[15:8] rssi_sec40_chain1 : 8, //[23:16] rssi_sec80_chain1 : 8; //[31:24] volatile uint32_t rssi_pri_chain2 : 8, //[7:0] rssi_sec20_chain2 : 8, //[15:8] rssi_sec40_chain2 : 8, //[23:16] rssi_sec80_chain2 : 8; //[31:24] volatile uint32_t rssi_pri_chain3 : 8, //[7:0] rssi_sec20_chain3 : 8, //[15:8] rssi_sec40_chain3 : 8, //[23:16] rssi_sec80_chain3 : 8; //[31:24] volatile uint32_t rssi_comb : 8, //[7:0] bandwidth : 2, //[9:8] reserved : 22; //[31:10] }; /* rssi_pri_chain0 RSSI for the primary 20 MHz channel on chain 0. Note: value of 0x80 indicates invalid RSSI. This applies to all RSSI fields rssi_sec20_chain0 RSSI for the secondary 20 MHz channel on chain 0 rssi_sec40_chain0 RSSI for the secondary 40 MHz channel on chain 0. Note: For Beeliner, 80MHz non-HT duplicate packets will not exercise this field because this mode is disabled in the AGC (unreliable detection of 80MHz packets). The MAC must use the RX_SERVICE scrambler seed to determine the actual bandwidth of the duplicate packet. rssi_sec80_chain0 RSSI for the secondary 80 MHz channel on chain 0 rssi_pri_chain1 RSSI for the primary 20 MHz channel on chain 1 rssi_sec20_chain1 RSSI for the secondary 20 MHz channel on chain 1 rssi_sec40_chain1 RSSI for the secondary 40 MHz channel on chain 1. Note: For Beeliner, 80MHz non-HT duplicate packets will not exercise this field because this mode is disabled in the AGC (unreliable detection of 80MHz packets). The MAC must use the RX_SERVICE scrambler seed to determine the actual bandwidth of the duplicate packet. rssi_sec80_chain1 RSSI for the secondary 80 MHz channel on chain 1 rssi_pri_chain2 RSSI for the primary 20 MHz channel on chain 2 rssi_sec20_chain2 RSSI for the secondary 20 MHz channel on chain 2 rssi_sec40_chain2 RSSI for the secondary 40 MHz channel on chain 2 Note: For Beeliner, 80MHz non-HT duplicate packets will not exercise this field because this mode is disabled in the AGC (unreliable detection of 80MHz packets). The MAC must use the RX_SERVICE scrambler seed to determine the actual bandwidth of the duplicate packet. rssi_sec80_chain2 RSSI for the secondary 80 MHz channel on chain 2 rssi_pri_chain3 RSSI for the primary 20 MHz channel on chain 3 rssi_sec20_chain3 RSSI for the secondary 20 MHz channel on chain 3 rssi_sec40_chain3 RSSI for the secondary 40 MHz channel on chain 3 Note: For Beeliner, 80MHz non-HT duplicate packets will not exercise this field because this mode is disabled in the AGC (unreliable detection of 80MHz packets). The MAC must use the RX_SERVICE scrambler seed to determine the actual bandwidth of the duplicate packet. rssi_sec80_chain3 RSSI for the secondary 80 MHz channel on chain 3 rssi_comb Combined RSSI for primary 20MHz only bandwidth Bandwidth field detected by PHY AGC, prior to decoding of (V)HT-SIG fields. reserved Reserved. Should always be set to 0 and ignored on reception. */ /* Description RX_RSSI_LEGACY_0_RSSI_PRI_CHAIN0 RSSI for the primary 20 MHz channel on chain 0. Note: value of 0x80 indicates invalid RSSI. This applies to all RSSI fields */ #define RX_RSSI_LEGACY_0_RSSI_PRI_CHAIN0_OFFSET 0x00000000 #define RX_RSSI_LEGACY_0_RSSI_PRI_CHAIN0_LSB 0 #define RX_RSSI_LEGACY_0_RSSI_PRI_CHAIN0_MASK 0x000000ff /* Description RX_RSSI_LEGACY_0_RSSI_SEC20_CHAIN0 RSSI for the secondary 20 MHz channel on chain 0 */ #define RX_RSSI_LEGACY_0_RSSI_SEC20_CHAIN0_OFFSET 0x00000000 #define RX_RSSI_LEGACY_0_RSSI_SEC20_CHAIN0_LSB 8 #define RX_RSSI_LEGACY_0_RSSI_SEC20_CHAIN0_MASK 0x0000ff00 /* Description RX_RSSI_LEGACY_0_RSSI_SEC40_CHAIN0 RSSI for the secondary 40 MHz channel on chain 0. Note: For Beeliner, 80MHz non-HT duplicate packets will not exercise this field because this mode is disabled in the AGC (unreliable detection of 80MHz packets). The MAC must use the RX_SERVICE scrambler seed to determine the actual bandwidth of the duplicate packet. */ #define RX_RSSI_LEGACY_0_RSSI_SEC40_CHAIN0_OFFSET 0x00000000 #define RX_RSSI_LEGACY_0_RSSI_SEC40_CHAIN0_LSB 16 #define RX_RSSI_LEGACY_0_RSSI_SEC40_CHAIN0_MASK 0x00ff0000 /* Description RX_RSSI_LEGACY_0_RSSI_SEC80_CHAIN0 RSSI for the secondary 80 MHz channel on chain 0 */ #define RX_RSSI_LEGACY_0_RSSI_SEC80_CHAIN0_OFFSET 0x00000000 #define RX_RSSI_LEGACY_0_RSSI_SEC80_CHAIN0_LSB 24 #define RX_RSSI_LEGACY_0_RSSI_SEC80_CHAIN0_MASK 0xff000000 /* Description RX_RSSI_LEGACY_1_RSSI_PRI_CHAIN1 RSSI for the primary 20 MHz channel on chain 1 */ #define RX_RSSI_LEGACY_1_RSSI_PRI_CHAIN1_OFFSET 0x00000004 #define RX_RSSI_LEGACY_1_RSSI_PRI_CHAIN1_LSB 0 #define RX_RSSI_LEGACY_1_RSSI_PRI_CHAIN1_MASK 0x000000ff /* Description RX_RSSI_LEGACY_1_RSSI_SEC20_CHAIN1 RSSI for the secondary 20 MHz channel on chain 1 */ #define RX_RSSI_LEGACY_1_RSSI_SEC20_CHAIN1_OFFSET 0x00000004 #define RX_RSSI_LEGACY_1_RSSI_SEC20_CHAIN1_LSB 8 #define RX_RSSI_LEGACY_1_RSSI_SEC20_CHAIN1_MASK 0x0000ff00 /* Description RX_RSSI_LEGACY_1_RSSI_SEC40_CHAIN1 RSSI for the secondary 40 MHz channel on chain 1. Note: For Beeliner, 80MHz non-HT duplicate packets will not exercise this field because this mode is disabled in the AGC (unreliable detection of 80MHz packets). The MAC must use the RX_SERVICE scrambler seed to determine the actual bandwidth of the duplicate packet. */ #define RX_RSSI_LEGACY_1_RSSI_SEC40_CHAIN1_OFFSET 0x00000004 #define RX_RSSI_LEGACY_1_RSSI_SEC40_CHAIN1_LSB 16 #define RX_RSSI_LEGACY_1_RSSI_SEC40_CHAIN1_MASK 0x00ff0000 /* Description RX_RSSI_LEGACY_1_RSSI_SEC80_CHAIN1 RSSI for the secondary 80 MHz channel on chain 1 */ #define RX_RSSI_LEGACY_1_RSSI_SEC80_CHAIN1_OFFSET 0x00000004 #define RX_RSSI_LEGACY_1_RSSI_SEC80_CHAIN1_LSB 24 #define RX_RSSI_LEGACY_1_RSSI_SEC80_CHAIN1_MASK 0xff000000 /* Description RX_RSSI_LEGACY_2_RSSI_PRI_CHAIN2 RSSI for the primary 20 MHz channel on chain 2 */ #define RX_RSSI_LEGACY_2_RSSI_PRI_CHAIN2_OFFSET 0x00000008 #define RX_RSSI_LEGACY_2_RSSI_PRI_CHAIN2_LSB 0 #define RX_RSSI_LEGACY_2_RSSI_PRI_CHAIN2_MASK 0x000000ff /* Description RX_RSSI_LEGACY_2_RSSI_SEC20_CHAIN2 RSSI for the secondary 20 MHz channel on chain 2 */ #define RX_RSSI_LEGACY_2_RSSI_SEC20_CHAIN2_OFFSET 0x00000008 #define RX_RSSI_LEGACY_2_RSSI_SEC20_CHAIN2_LSB 8 #define RX_RSSI_LEGACY_2_RSSI_SEC20_CHAIN2_MASK 0x0000ff00 /* Description RX_RSSI_LEGACY_2_RSSI_SEC40_CHAIN2 RSSI for the secondary 40 MHz channel on chain 2 Note: For Beeliner, 80MHz non-HT duplicate packets will not exercise this field because this mode is disabled in the AGC (unreliable detection of 80MHz packets). The MAC must use the RX_SERVICE scrambler seed to determine the actual bandwidth of the duplicate packet. */ #define RX_RSSI_LEGACY_2_RSSI_SEC40_CHAIN2_OFFSET 0x00000008 #define RX_RSSI_LEGACY_2_RSSI_SEC40_CHAIN2_LSB 16 #define RX_RSSI_LEGACY_2_RSSI_SEC40_CHAIN2_MASK 0x00ff0000 /* Description RX_RSSI_LEGACY_2_RSSI_SEC80_CHAIN2 RSSI for the secondary 80 MHz channel on chain 2 */ #define RX_RSSI_LEGACY_2_RSSI_SEC80_CHAIN2_OFFSET 0x00000008 #define RX_RSSI_LEGACY_2_RSSI_SEC80_CHAIN2_LSB 24 #define RX_RSSI_LEGACY_2_RSSI_SEC80_CHAIN2_MASK 0xff000000 /* Description RX_RSSI_LEGACY_3_RSSI_PRI_CHAIN3 RSSI for the primary 20 MHz channel on chain 3 */ #define RX_RSSI_LEGACY_3_RSSI_PRI_CHAIN3_OFFSET 0x0000000c #define RX_RSSI_LEGACY_3_RSSI_PRI_CHAIN3_LSB 0 #define RX_RSSI_LEGACY_3_RSSI_PRI_CHAIN3_MASK 0x000000ff /* Description RX_RSSI_LEGACY_3_RSSI_SEC20_CHAIN3 RSSI for the secondary 20 MHz channel on chain 3 */ #define RX_RSSI_LEGACY_3_RSSI_SEC20_CHAIN3_OFFSET 0x0000000c #define RX_RSSI_LEGACY_3_RSSI_SEC20_CHAIN3_LSB 8 #define RX_RSSI_LEGACY_3_RSSI_SEC20_CHAIN3_MASK 0x0000ff00 /* Description RX_RSSI_LEGACY_3_RSSI_SEC40_CHAIN3 RSSI for the secondary 40 MHz channel on chain 3 Note: For Beeliner, 80MHz non-HT duplicate packets will not exercise this field because this mode is disabled in the AGC (unreliable detection of 80MHz packets). The MAC must use the RX_SERVICE scrambler seed to determine the actual bandwidth of the duplicate packet. */ #define RX_RSSI_LEGACY_3_RSSI_SEC40_CHAIN3_OFFSET 0x0000000c #define RX_RSSI_LEGACY_3_RSSI_SEC40_CHAIN3_LSB 16 #define RX_RSSI_LEGACY_3_RSSI_SEC40_CHAIN3_MASK 0x00ff0000 /* Description RX_RSSI_LEGACY_3_RSSI_SEC80_CHAIN3 RSSI for the secondary 80 MHz channel on chain 3 */ #define RX_RSSI_LEGACY_3_RSSI_SEC80_CHAIN3_OFFSET 0x0000000c #define RX_RSSI_LEGACY_3_RSSI_SEC80_CHAIN3_LSB 24 #define RX_RSSI_LEGACY_3_RSSI_SEC80_CHAIN3_MASK 0xff000000 /* Description RX_RSSI_LEGACY_4_RSSI_COMB Combined RSSI for primary 20MHz only */ #define RX_RSSI_LEGACY_4_RSSI_COMB_OFFSET 0x00000010 #define RX_RSSI_LEGACY_4_RSSI_COMB_LSB 0 #define RX_RSSI_LEGACY_4_RSSI_COMB_MASK 0x000000ff /* Description RX_RSSI_LEGACY_4_BANDWIDTH Bandwidth field detected by PHY AGC, prior to decoding of (V)HT-SIG fields. */ #define RX_RSSI_LEGACY_4_BANDWIDTH_OFFSET 0x00000010 #define RX_RSSI_LEGACY_4_BANDWIDTH_LSB 8 #define RX_RSSI_LEGACY_4_BANDWIDTH_MASK 0x00000300 /* Description RX_RSSI_LEGACY_4_RESERVED Reserved. Should always be set to 0 and ignored on reception. */ #define RX_RSSI_LEGACY_4_RESERVED_OFFSET 0x00000010 #define RX_RSSI_LEGACY_4_RESERVED_LSB 10 #define RX_RSSI_LEGACY_4_RESERVED_MASK 0xfffffc00 #endif // _RX_RSSI_LEGACY_H_