// Copyright (c) 2014 Qualcomm Atheros, Inc. All rights reserved. // $ATH_LICENSE_HW_HDR_C$ // // DO NOT EDIT! This file is automatically generated // These definitions are tied to a particular hardware layout #ifndef _RX_PKT_END_H_ #define _RX_PKT_END_H_ #if !defined(__ASSEMBLER__) #endif // ################ START SUMMARY ################# // // Dword Fields // 0 rx_success[0], reserved_0a[2:1], error_tx_interrupt_rx[3], error_ofdm_power_drop[4], error_ofdm_restart[5], error_cck_power_drop[6], error_cck_restart[7], reserved_0b[31:8] // 1 phy_timestamp_1[31:0] // 2 phy_timestamp_2[31:0] // 3-4 struct rx_location_info rx_location_info; // // ################ END SUMMARY ################# #define NUM_OF_DWORDS_RX_PKT_END 5 struct rx_pkt_end { uint32_t rx_success : 1, //[0] reserved_0a : 2, //[2:1] error_tx_interrupt_rx : 1, //[3] error_ofdm_power_drop : 1, //[4] error_ofdm_restart : 1, //[5] error_cck_power_drop : 1, //[6] error_cck_restart : 1, //[7] reserved_0b : 24; //[31:8] uint32_t phy_timestamp_1 : 32; //[31:0] uint32_t phy_timestamp_2 : 32; //[31:0] struct rx_location_info rx_location_info; }; /* rx_success PHY successfully completed transfer of PSDU reserved_0a Reserved: Generator should set to 0 and consumer shall ignore error_tx_interrupt_rx PSDU terminated due to TX_PHY_DESC message during receive. Any receive packet will be terminated if a transmit starts error_ofdm_power_drop PSDU terminated due to power drop during OFDM reception error_ofdm_restart PSDU terminated due to large increase in receive power during OFDM reception error_cck_power_drop PSDU terminated due to power drop during CCK reception error_cck_restart PSDU terminated due to large increase in receive power during CCK reception reserved_0b Reserved: Generator should set to 0 and consumer shall ignore phy_timestamp_1 The PHY timestamp in the AMPI of the most recent rising edge of rx_clear_pri. This field should set to 0 by the PHY and should be updated by the AMPI before being forwarded to the rest of the MAC. phy_timestamp_2 The PHY timestamp in the AMPI of the rising edge of rx_clear_pri prior to the one reported in phy_timestamp_1. This field should set to 0 by the PHY and should be updated by the AMPI before being forwarded to the rest of the MAC. struct rx_location_info rx_location_info Format defined in beeliner_mac_phy_interace document */ /* Description RX_PKT_END_0_RX_SUCCESS PHY successfully completed transfer of PSDU */ #define RX_PKT_END_0_RX_SUCCESS_OFFSET 0x00000000 #define RX_PKT_END_0_RX_SUCCESS_LSB 0 #define RX_PKT_END_0_RX_SUCCESS_MASK 0x00000001 /* Description RX_PKT_END_0_RESERVED_0A Reserved: Generator should set to 0 and consumer shall ignore */ #define RX_PKT_END_0_RESERVED_0A_OFFSET 0x00000000 #define RX_PKT_END_0_RESERVED_0A_LSB 1 #define RX_PKT_END_0_RESERVED_0A_MASK 0x00000006 /* Description RX_PKT_END_0_ERROR_TX_INTERRUPT_RX PSDU terminated due to TX_PHY_DESC message during receive. Any receive packet will be terminated if a transmit starts */ #define RX_PKT_END_0_ERROR_TX_INTERRUPT_RX_OFFSET 0x00000000 #define RX_PKT_END_0_ERROR_TX_INTERRUPT_RX_LSB 3 #define RX_PKT_END_0_ERROR_TX_INTERRUPT_RX_MASK 0x00000008 /* Description RX_PKT_END_0_ERROR_OFDM_POWER_DROP PSDU terminated due to power drop during OFDM reception */ #define RX_PKT_END_0_ERROR_OFDM_POWER_DROP_OFFSET 0x00000000 #define RX_PKT_END_0_ERROR_OFDM_POWER_DROP_LSB 4 #define RX_PKT_END_0_ERROR_OFDM_POWER_DROP_MASK 0x00000010 /* Description RX_PKT_END_0_ERROR_OFDM_RESTART PSDU terminated due to large increase in receive power during OFDM reception */ #define RX_PKT_END_0_ERROR_OFDM_RESTART_OFFSET 0x00000000 #define RX_PKT_END_0_ERROR_OFDM_RESTART_LSB 5 #define RX_PKT_END_0_ERROR_OFDM_RESTART_MASK 0x00000020 /* Description RX_PKT_END_0_ERROR_CCK_POWER_DROP PSDU terminated due to power drop during CCK reception */ #define RX_PKT_END_0_ERROR_CCK_POWER_DROP_OFFSET 0x00000000 #define RX_PKT_END_0_ERROR_CCK_POWER_DROP_LSB 6 #define RX_PKT_END_0_ERROR_CCK_POWER_DROP_MASK 0x00000040 /* Description RX_PKT_END_0_ERROR_CCK_RESTART PSDU terminated due to large increase in receive power during CCK reception */ #define RX_PKT_END_0_ERROR_CCK_RESTART_OFFSET 0x00000000 #define RX_PKT_END_0_ERROR_CCK_RESTART_LSB 7 #define RX_PKT_END_0_ERROR_CCK_RESTART_MASK 0x00000080 /* Description RX_PKT_END_0_RESERVED_0B Reserved: Generator should set to 0 and consumer shall ignore */ #define RX_PKT_END_0_RESERVED_0B_OFFSET 0x00000000 #define RX_PKT_END_0_RESERVED_0B_LSB 8 #define RX_PKT_END_0_RESERVED_0B_MASK 0xffffff00 /* Description RX_PKT_END_1_PHY_TIMESTAMP_1 The PHY timestamp in the AMPI of the most recent rising edge of rx_clear_pri. This field should set to 0 by the PHY and should be updated by the AMPI before being forwarded to the rest of the MAC. */ #define RX_PKT_END_1_PHY_TIMESTAMP_1_OFFSET 0x00000004 #define RX_PKT_END_1_PHY_TIMESTAMP_1_LSB 0 #define RX_PKT_END_1_PHY_TIMESTAMP_1_MASK 0xffffffff /* Description RX_PKT_END_2_PHY_TIMESTAMP_2 The PHY timestamp in the AMPI of the rising edge of rx_clear_pri prior to the one reported in phy_timestamp_1. This field should set to 0 by the PHY and should be updated by the AMPI before being forwarded to the rest of the MAC. */ #define RX_PKT_END_2_PHY_TIMESTAMP_2_OFFSET 0x00000008 #define RX_PKT_END_2_PHY_TIMESTAMP_2_LSB 0 #define RX_PKT_END_2_PHY_TIMESTAMP_2_MASK 0xffffffff #define RX_PKT_END_3_RX_LOCATION_INFO_RX_LOCATION_INFO_OFFSET 0x0000000c #define RX_PKT_END_3_RX_LOCATION_INFO_RX_LOCATION_INFO_LSB 0 #define RX_PKT_END_3_RX_LOCATION_INFO_RX_LOCATION_INFO_MASK 0xffffffff #define RX_PKT_END_4_RX_LOCATION_INFO_RX_LOCATION_INFO_OFFSET 0x00000010 #define RX_PKT_END_4_RX_LOCATION_INFO_RX_LOCATION_INFO_LSB 0 #define RX_PKT_END_4_RX_LOCATION_INFO_RX_LOCATION_INFO_MASK 0xffffffff #endif // _RX_PKT_END_H_