// Copyright (c) 2013 Qualcomm Atheros, Inc. All rights reserved. // $ATH_LICENSE_HW_HDR_C$ // // DO NOT EDIT! This file is automatically generated // These definitions are tied to a particular hardware layout #ifndef _TX_FES_SETUP_H_ #define _TX_FES_SETUP_H_ #if !defined(__ASSEMBLER__) #endif // ################ START SUMMARY ################# // // Dword Fields // 0 schedule_id[15:0], schedule_cmd_ring_id[20:16], fes_control_mode[22:21], number_of_users[24:23], schedule_try[28:25], ndp_frame[29], txbf[30], send_tx_expect_cbf[31] // 1 fc_to_ds_mask[0], fc_from_ds_mask[1], fc_more_frag_mask[2], fc_retry_mask[3], fc_pwr_mgt_mask[4], fc_more_data_mask[5], fc_prot_frame_mask[6], fc_order_mask[7], duration_field_mask[8], sequence_control_mask[9], qc_tid_mask[10], qc_eosp_mask[11], qc_ack_policy_mask[12], qc_amsdu_mask[13], reserved_1[14], qc_15to8_mask[15], iv_mask[16], fc_to_ds_setting[17], fc_from_ds_setting[18], fc_more_frag_setting[19], fc_retry_setting[21:20], fc_pwr_mgt_setting[22], fc_more_data_setting[24:23], fc_prot_frame_setting[26:25], fc_order_setting[27], qc_tid_setting[31:28] // 2 qc_eosp_setting[1:0], qc_ack_policy_setting[2], qc_amsdu_setting[3], qc_15to8_setting[11:4], raw_already_encrypted[12], allow_txop_exceed_in_1st_pkt[13], mprot_addr_sel[14], ignore_bw_available[15], fes_time_20mhz[31:16] // 3 fes_time_40mhz[15:0], fes_time_80mhz[31:16] // 4 max_txop_time[15:0], reserved_4[20:16], peer_idx[31:21] // 5 num_ss_user0[2:0], num_ss_user1[5:3], num_ss_user2[8:6], use_static_bw[9], static_bandwidth[11:10], cbf_user_number[13:12], cv_id[21:14], frame_type[24:22], tx_chain_mask[28:25], bf_type[30:29], send_tx_bf_params[31] // 6 cbf_nc_index[2:0], cbf_nc_index_mask[3], cbf_nr_index[6:4], cbf_nr_index_mask[7], cbf_bw[9:8], cbf_bw_mask[10], cbf_feedback_type[11], cbf_feedback_type_mask[12], cbf_sounding_token[18:13], cbf_sounding_token_mask[19], txbf_per_packet_no_csd_no_walsh[20], ignore_tbtt[21], reserved_6[31:22] // // ################ END SUMMARY ################# #define NUM_OF_DWORDS_TX_FES_SETUP 7 struct tx_fes_setup { volatile uint32_t schedule_id : 16, //[15:0] schedule_cmd_ring_id : 5, //[20:16] fes_control_mode : 2, //[22:21] number_of_users : 2, //[24:23] schedule_try : 4, //[28:25] ndp_frame : 1, //[29] txbf : 1, //[30] send_tx_expect_cbf : 1; //[31] volatile uint32_t fc_to_ds_mask : 1, //[0] fc_from_ds_mask : 1, //[1] fc_more_frag_mask : 1, //[2] fc_retry_mask : 1, //[3] fc_pwr_mgt_mask : 1, //[4] fc_more_data_mask : 1, //[5] fc_prot_frame_mask : 1, //[6] fc_order_mask : 1, //[7] duration_field_mask : 1, //[8] sequence_control_mask : 1, //[9] qc_tid_mask : 1, //[10] qc_eosp_mask : 1, //[11] qc_ack_policy_mask : 1, //[12] qc_amsdu_mask : 1, //[13] reserved_1 : 1, //[14] qc_15to8_mask : 1, //[15] iv_mask : 1, //[16] fc_to_ds_setting : 1, //[17] fc_from_ds_setting : 1, //[18] fc_more_frag_setting : 1, //[19] fc_retry_setting : 2, //[21:20] fc_pwr_mgt_setting : 1, //[22] fc_more_data_setting : 2, //[24:23] fc_prot_frame_setting : 2, //[26:25] fc_order_setting : 1, //[27] qc_tid_setting : 4; //[31:28] volatile uint32_t qc_eosp_setting : 2, //[1:0] qc_ack_policy_setting : 1, //[2] qc_amsdu_setting : 1, //[3] qc_15to8_setting : 8, //[11:4] raw_already_encrypted : 1, //[12] allow_txop_exceed_in_1st_pkt : 1, //[13] mprot_addr_sel : 1, //[14] ignore_bw_available : 1, //[15] fes_time_20mhz : 16; //[31:16] volatile uint32_t fes_time_40mhz : 16, //[15:0] fes_time_80mhz : 16; //[31:16] volatile uint32_t max_txop_time : 16, //[15:0] reserved_4 : 5, //[20:16] peer_idx : 11; //[31:21] volatile uint32_t num_ss_user0 : 3, //[2:0] num_ss_user1 : 3, //[5:3] num_ss_user2 : 3, //[8:6] use_static_bw : 1, //[9] static_bandwidth : 2, //[11:10] cbf_user_number : 2, //[13:12] cv_id : 8, //[21:14] frame_type : 3, //[24:22] tx_chain_mask : 4, //[28:25] bf_type : 2, //[30:29] send_tx_bf_params : 1; //[31] volatile uint32_t cbf_nc_index : 3, //[2:0] cbf_nc_index_mask : 1, //[3] cbf_nr_index : 3, //[6:4] cbf_nr_index_mask : 1, //[7] cbf_bw : 2, //[9:8] cbf_bw_mask : 1, //[10] cbf_feedback_type : 1, //[11] cbf_feedback_type_mask : 1, //[12] cbf_sounding_token : 6, //[18:13] cbf_sounding_token_mask : 1, //[19] txbf_per_packet_no_csd_no_walsh : 1, //[20] ignore_tbtt : 1, //[21] reserved_6 : 10; //[31:22] }; /* schedule_id This field is overwritten by the scheduler module and it's value is coming from theschedule_id field in the Scheduler command. Configured by scheduler in HW transmit mode A field that HW copies over into the scheduling status report, so that SW can determine to which scheduler command the status report belongs. This schedule ID is also reported in the PPDU status. schedule_cmd_ring_id This field is overwritten by the scheduler module and its value is based on the scheduler ring where the command is initiated. The schedule command ring that originated this transmission fes_control_mode This field is overwritten by the scheduler module and it's value is coming from the FES_control_mode field in the Scheduler command. No HW generated TLVs PDG is activated to generate TLVs Note: Final Bandwidth selection is always performed by TX PCU. number_of_users The number of users in this transmission. In case of multiple users, the PCU TX will generate a TX FES status for each of the users. When number of users is 1, only user0 fields in any of the descriptors are applicable. When number of users is 2, only user0 and user1 fields are applicable. schedule_try This field is overwritten by the scheduler module and it's value is coming from an internal counter in the scheduler that keeps track of how many times a scheduling command has been tried. The number of times this scheduler command has been tried ndp_frame This field is overwritten by the scheduler module and it's value is coming from thendp_frame field in the Scheduler command. When set, the scheduling command contains an NDP frame. This can only be done using the SW transmit mode. txbf If set, this bit indicates that this is a TX beamformed SU transaction or MU transaction send_tx_expect_cbf Indicates to the TXPCU whether to send the TX_EXPECT_CBF TLV to the PHY or not. If this is a NDP or BR Poll which is used in a SIFS burst with beamformed or MU packet, this should be set. Otherwise if sounding sequence and the beamformed transmission and not performed in a SIFS burst then the CBF should go directly to software which will decode and apply it to some later transmit beamformed packet. In this situation there is no need for the PHY to get the TX_EXPECT_CBF TLV in this case and in fact will confuse the SVD engine. fc_to_ds_mask Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: Enc_type is NOT allowed b Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_to_ds_setting. : HW is not allowed to update the contents of this field. fc_from_ds_mask Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_from_ds_setting. : HW is not allowed to update the contents of this field. fc_more_frag_mask Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_more_frag_setting. : HW is not allowed to update the contents of this field. fc_retry_mask Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the setting for this field on the retry_bitmap_31_0 and retry_bitmap_63_32 fields in the MPDU_queue_extension descriptor : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_retry_setting. : HW is not allowed to update the contents of this field. fc_pwr_mgt_mask Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_pwr_mgt_setting. : HW is not allowed to update the contents of this field. fc_more_data_mask Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. TX_PCU has the abilty of overwrite the More data field, based on the Set_fc_more_data field in the PPDU_SS_... TLVs given by PDG. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_more_data_setting. : HW is not allowed to update the contents of this field. fc_prot_frame_mask Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the setting for the Protected frame bit on the key_type setting in the peer entry. When NO encryption is needed, the bit will be set to 0, When the any encryption is needed, the bit will be set to 0. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_prot_frame_setting. When fc_prot_frame_setting is set, OLE will encrypt the frame, based on the encryption type indicate with the key_type setting in the peer entry : HW is not allowed to update the contents of this field. fc_order_mask Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_order_setting. : HW is not allowed to update the contents of this field. duration_field_mask Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, TX PCU will get the value for this field from the Duration fields in the PPDU_SS_... TLVs from PDG. : HW is allowed to update this field. The value that HW (TX_PCU) will insert is coming from the Duration fields in the PPDU_SS_... TLVs from PDG (similar as with NON RAW/Native WiFi frames). : HW is not allowed to update the contents of this field. sequence_control_mask Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the start_seq_num and seqnum_bitmap_31_0, seqnum_bitmap_63_32 fields from the mpdu_queue_ext datastructure. : HW is allowed to update this field. The value that HW (OLE) will insert is the same as with NON RAW/Native WiFi frames (see description above). : HW is not allowed to update the contents of this field. qc_tid_mask Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: qc_tid_setting. : HW is not allowed to update the contents of this field. qc_eosp_mask Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. TX_PCU has the abilty of overwrite the QoS eosp field, based on the Set_fc_more_data field in the PPDU_SS_... TLVs given by PDG. : HW is allowed to update the QoS eosp field. The value that HW (OLE) will insert is the given in field: qc_eosp_setting. : HW is not allowed to update the contents of this field. qc_ack_policy_mask Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. : HW is allowed to update the QoS ack policy field. The value that HW (OLE) will insert is determined by field: qc_ack_pol_setting. : HW is not allowed to update the contents of this field. qc_amsdu_mask Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. : HW is allowed to update the QoS amsdu field. The value that HW (OLE) will insert is determined by field: qc_amsdu_setting. : HW is not allowed to update the contents of this field. reserved_1 qc_15to8_mask Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. : HW is allowed to update the QoS control field, bits 15-8. The value that HW (OLE) will insert is determined by field: qc_15to8_setting. : HW is not allowed to update the contents of this field. iv_mask Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the IV field insertion/value on the on the encryption type indicate with the key_type setting in the peer entry : OLE is allowed to overwrite the IV field, in case key_type setting in the peer entry indicates some encryption. : OLE is not allowed to overwrite any of the IV field contents. fc_to_ds_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_to_ds_mask is not set. : OLE will set the frame control field, to ds bit to 0 : OLE will set the frame control field, to ds bit to 1 fc_from_ds_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_from_ds_mask is not set. : OLE will set the frame control field, from ds bit to 0 : OLE will set the frame control field, from ds bit to 1 fc_more_frag_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_more_frag_mask is not set. : OLE will set the frame control field, more frag bit to 0 : OLE will set the frame control field, more frag bit to 1 fc_retry_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_retry_mask is not set. : OLE will set the frame control field, retry bit to 0 : OLE will set the frame control field, retry bit to 1 : OLE will base the setting for this field on the retry_bitmap_31_0 and retry_bitmap_63_32 fields in the MPDU_queue_extension descriptor fc_pwr_mgt_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_pwr_mgt_mask is not set. : OLE will set the frame control field, pwr_mgt bit to 0 : OLE will set the frame control field, pwr_mgt bit to 1 fc_more_data_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_more_Data_mask is not set. : OLE will set the frame control field, More data bit to 0 : OLE will set the frame control field, More data bit to 1 : OLE will set the Frame control, More data bit to 0, but TX_PCU has the abilty to overwrite this based on the Set_fc_more_data field in the PPDU_SS_... TLVs given by PDG. fc_prot_frame_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_prot_frame_mask is not set. : OLE will set the frame control field , order bit to 0 : OLE will set the frame control field , order bit to 1 : OLE configures the Frame Control field, Prot frame bit according to the following rule: When the encryption type indicated with the key_type setting in the peer entry is set to no crypto, the fc prot_frame bit is set to zero. When the encryption type indicated with the key_type setting in the peer entry is set to some encryption type, the OLE will encrypt the frame AND set the fc prot frame bit to 1. fc_order_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_order_mask is not set. : OLE will set the frame control field , order bit to 0 : OLE will set the frame control field , order bit to 1 qc_tid_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_tid_mask is not set. OLE sets the TID field in the QoS control field to this value. qc_eosp_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_eosp_mask is not set. : OLE will set the QoS control bit to 0 : OLE will set the QoS control bit to 1 : OLE will set the QoS control bit to 0, but TX_PCU has the abilty of overwrite the QoS eosp field, based on the Set_fc_more_data field in the PPDU_SS_... TLVs given by PDG. qc_ack_policy_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_ack_policy_mask is not set. : OLE will set the QoS control field ack policy bit to 0 : OLE will set the QoS control ack policy bit to 1 qc_amsdu_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_amsdu_mask is not set. : OLE will set the QoS control field amsdu bit to 0 : OLE will set the QoS control field amsdu bit to 1 qc_15to8_setting Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_15to8_mask is not set. OLE sets bit 8 to 16 in the QoS control field to this value. raw_already_encrypted If set it indicates that the RAW MPDU has already been encrypted and does not require HW encryption. If clear and if the frame control indicates that this is a protected MPDU and the peer key type indicates a cipher type then the HW is expected to encrypt this packet. allow_txop_exceed_in_1st_pkt If set, the single MPDU after RBO is allowed to exceed TXOP. If clear, single MPDU after RBO is not allowed to exceed TXOP. mprot_addr_sel If set, address 1/2 of protection frame (RTS and CTS2Self) will be taken directly from address 1/2 of USER0 PPDU frame. If clear, address 1/2 of protection frame will be come from mac_addr_a/b/c fields of peer_entry. ignore_bw_available If set, TXPCU ignores 'BW available signals' from the scheduler and transmit using the single BW that SW has programmed the transmission to go out in. This bit should be set for SIFS response frame to PS-Poll/uAPSD/QBoost and note that for this mode, SW is only allowed to program a single transmit BW. fes_time_20mhz Field only valid if FES_control_mode is set to SW_transmit_mode The amount of time (in us) the SW defined frame exchange sequence takes when transmission BW is 20 Mhz. If this bandwidth is not supported, SW should program the value in this field equal to the smallest of valid Fes_time_40MHz or Fes_time_80Mhz fields. Used by TX PCU to confirm that transmission will fit in available TXOP time fes_time_40mhz Field only valid if FES_control_mode is set to SW_transmit_mode The amount of time (in us) the SW defined frame exchange sequence takes when transmission BW is 40 Mhz. If this bandwidth is not supported, SW should program the value in this field equal to the smallest of valid Fes_time_20MHz or Fes_time_80Mhz fields. Used by TX PCU to confirm that transmission will fit in available TXOP time fes_time_80mhz Field only valid if FES_control_mode is set to SW_transmit_mode The amount of time (in us) the SW defined frame exchange sequence takes when transmission BW is 80 Mhz. If this bandwidth is not supported, SW should program the value in this field equal to the smallest of valid Fes_time_20MHz or Fes_time_40Mhz fields. Used by TX PCU to confirm that transmission will fit in available TXOP time max_txop_time Field only valid if FES_control_mode is set to SW_transmit_mode The maximum TXOP time (in us) allowed for the upcoming Frame Exchange Sequence (FES) in SW transmit mode. Scheduler determines this field based on all TXOP related boundary checks. This field is used by TX PCU to confirm that the upcoming transmission (after BW selection result is known) will within this time. The max_txop_time is used for a SIFS burst of transmit packets. It may include time reservation for multiple FES. Allowed transmit time needs to have room for 4us extra, in case an extra symbol is needed for LDPC. reserved_4 peer_idx Used for implicit BF sounding capture on receive Ack/BA. The RXPCU needs to tag the receive sounding with peer_idx so FW will know which STA is associated with Ack/BA sounding. num_ss_user0 Part of TX_BF_PARAMS: Number of spatial streams assigned to user 0 in the next MU MIMO packet or the number of streams in the next SU packet. For MU packets the values can be 1 or 2, for SU packets the value can be 1, 2, or 3 num_ss_user1 Part of TX_BF_PARAMS: Number of spatial streams assigned to user 1 in the next MIMO packet. num_ss_user2 Part of TX_BF_PARAMS: Number of spatial streams assigned to user 2 in the next MIMO packet. use_static_bw Part of TX_BF_PARAMS: This field is used to indicate to the SVD that the b/w that will be defined in the TX_PHY_DESC for the upcoming TXBF packet will be the same as the static bandwidth, i.e. the bandwidth that was in operation during sounding for the clients in question static_bandwidth Part of TX_BF_PARAMS: Packet bandwidth when use_static_bw is set: Not supported Field is reserved when use_static_bw is clear. cbf_user_number This field is only valid when expect_cbf is set. This field is inserted into the TX_EXPECT_CBF TLV generated by the TX PCU. Defines the source of the expected CBF. cv_id This field is only valid when expect_cbf is set. A unique ID corresponding to the CV data expected from the CBF frame. TXPCU copies this field over to the TX_FES_STATUS TLV frame_type (Not supported in Beeliner) Frame type indication. Indicates what type of frame is being sent. Supported values: 0: default 1: PS-Poll 2-7: Reserved tx_chain_mask Tx chain mask to support up to 4 antennas. This field is used for VECTOR_TRANSFER_START and TX_CBF_OFFSET. bf_type Defines the type of beamforming that is required using this CV data This field is used for TXPCU to construct VECTOR_TRANSFER_START. send_tx_bf_params If set indicates that the TXPCU should send the TX_BF_PARAMS associated with this FES. If send_tx_expect_cbf is set then the tx_bf_params would be sent after TXPCU sends the TX_CBF_OFFSET TLV. If txbf is set then the tx_bf_params is sent as soon as possible after the VECTOR_TRANSFER_START. For the case of MU, the TX_BF_PARAMS is sent as soon as possible after the last VECTOR_TRANSFER_START. cbf_nc_index Expected Nc_index of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_nc_index_mask is set to 1. cbf_nc_index_mask Mask bit for cbf_nc_index cbf_nr_index Expected Nr_index of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_nr_index_mask is set to 1. cbf_nr_index_mask Mask bit for cbf_nr_index cbf_bw Expected channel width of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_bw_mask is set to 1. Not supported cbf_bw_mask Mask bit for cbf_bw cbf_feedback_type Expected feedback type of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_feedback_type_mask is set to 1. cbf_feedback_type_mask Mask bit for cbf_feedback_type cbf_sounding_token Expected sounding token of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_sounding_token_mask is set to 1. cbf_sounding_token_mask Mask bit for cbf_sounding_token txbf_per_packet_no_csd_no_walsh If set, no_csd and no_walsh is applied to steering packet. TXPCU copies this field to VECTOR_FRAGMENT_START TLV and TX_PHY_DESC TLV. ignore_tbtt If set, PDG ignores remaining TBTTs in PPDU time calculation. reserved_6 Reserved - MAC to set this field to 0, PHY to ignore this field. */ /* Description TX_FES_SETUP_0_SCHEDULE_ID This field is overwritten by the scheduler module and it's value is coming from theschedule_id field in the Scheduler command. Configured by scheduler in HW transmit mode A field that HW copies over into the scheduling status report, so that SW can determine to which scheduler command the status report belongs. This schedule ID is also reported in the PPDU status. */ #define TX_FES_SETUP_0_SCHEDULE_ID_OFFSET 0x00000000 #define TX_FES_SETUP_0_SCHEDULE_ID_LSB 0 #define TX_FES_SETUP_0_SCHEDULE_ID_MASK 0x0000ffff /* Description TX_FES_SETUP_0_SCHEDULE_CMD_RING_ID This field is overwritten by the scheduler module and its value is based on the scheduler ring where the command is initiated. The schedule command ring that originated this transmission */ #define TX_FES_SETUP_0_SCHEDULE_CMD_RING_ID_OFFSET 0x00000000 #define TX_FES_SETUP_0_SCHEDULE_CMD_RING_ID_LSB 16 #define TX_FES_SETUP_0_SCHEDULE_CMD_RING_ID_MASK 0x001f0000 /* Description TX_FES_SETUP_0_FES_CONTROL_MODE This field is overwritten by the scheduler module and it's value is coming from the FES_control_mode field in the Scheduler command. No HW generated TLVs PDG is activated to generate TLVs Note: Final Bandwidth selection is always performed by TX PCU. */ #define TX_FES_SETUP_0_FES_CONTROL_MODE_OFFSET 0x00000000 #define TX_FES_SETUP_0_FES_CONTROL_MODE_LSB 21 #define TX_FES_SETUP_0_FES_CONTROL_MODE_MASK 0x00600000 /* Description TX_FES_SETUP_0_NUMBER_OF_USERS The number of users in this transmission. In case of multiple users, the PCU TX will generate a TX FES status for each of the users. When number of users is 1, only user0 fields in any of the descriptors are applicable. When number of users is 2, only user0 and user1 fields are applicable. */ #define TX_FES_SETUP_0_NUMBER_OF_USERS_OFFSET 0x00000000 #define TX_FES_SETUP_0_NUMBER_OF_USERS_LSB 23 #define TX_FES_SETUP_0_NUMBER_OF_USERS_MASK 0x01800000 /* Description TX_FES_SETUP_0_SCHEDULE_TRY This field is overwritten by the scheduler module and it's value is coming from an internal counter in the scheduler that keeps track of how many times a scheduling command has been tried. The number of times this scheduler command has been tried */ #define TX_FES_SETUP_0_SCHEDULE_TRY_OFFSET 0x00000000 #define TX_FES_SETUP_0_SCHEDULE_TRY_LSB 25 #define TX_FES_SETUP_0_SCHEDULE_TRY_MASK 0x1e000000 /* Description TX_FES_SETUP_0_NDP_FRAME This field is overwritten by the scheduler module and it's value is coming from thendp_frame field in the Scheduler command. When set, the scheduling command contains an NDP frame. This can only be done using the SW transmit mode. */ #define TX_FES_SETUP_0_NDP_FRAME_OFFSET 0x00000000 #define TX_FES_SETUP_0_NDP_FRAME_LSB 29 #define TX_FES_SETUP_0_NDP_FRAME_MASK 0x20000000 /* Description TX_FES_SETUP_0_TXBF If set, this bit indicates that this is a TX beamformed SU transaction or MU transaction */ #define TX_FES_SETUP_0_TXBF_OFFSET 0x00000000 #define TX_FES_SETUP_0_TXBF_LSB 30 #define TX_FES_SETUP_0_TXBF_MASK 0x40000000 /* Description TX_FES_SETUP_0_SEND_TX_EXPECT_CBF Indicates to the TXPCU whether to send the TX_EXPECT_CBF TLV to the PHY or not. If this is a NDP or BR Poll which is used in a SIFS burst with beamformed or MU packet, this should be set. Otherwise if sounding sequence and the beamformed transmission and not performed in a SIFS burst then the CBF should go directly to software which will decode and apply it to some later transmit beamformed packet. In this situation there is no need for the PHY to get the TX_EXPECT_CBF TLV in this case and in fact will confuse the SVD engine. */ #define TX_FES_SETUP_0_SEND_TX_EXPECT_CBF_OFFSET 0x00000000 #define TX_FES_SETUP_0_SEND_TX_EXPECT_CBF_LSB 31 #define TX_FES_SETUP_0_SEND_TX_EXPECT_CBF_MASK 0x80000000 /* Description TX_FES_SETUP_1_FC_TO_DS_MASK Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: Enc_type is NOT allowed b Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_to_ds_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_FC_TO_DS_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_TO_DS_MASK_LSB 0 #define TX_FES_SETUP_1_FC_TO_DS_MASK_MASK 0x00000001 /* Description TX_FES_SETUP_1_FC_FROM_DS_MASK Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_from_ds_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_FC_FROM_DS_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_FROM_DS_MASK_LSB 1 #define TX_FES_SETUP_1_FC_FROM_DS_MASK_MASK 0x00000002 /* Description TX_FES_SETUP_1_FC_MORE_FRAG_MASK Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_more_frag_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_FC_MORE_FRAG_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_MORE_FRAG_MASK_LSB 2 #define TX_FES_SETUP_1_FC_MORE_FRAG_MASK_MASK 0x00000004 /* Description TX_FES_SETUP_1_FC_RETRY_MASK Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the setting for this field on the retry_bitmap_31_0 and retry_bitmap_63_32 fields in the MPDU_queue_extension descriptor : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_retry_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_FC_RETRY_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_RETRY_MASK_LSB 3 #define TX_FES_SETUP_1_FC_RETRY_MASK_MASK 0x00000008 /* Description TX_FES_SETUP_1_FC_PWR_MGT_MASK Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_pwr_mgt_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_FC_PWR_MGT_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_PWR_MGT_MASK_LSB 4 #define TX_FES_SETUP_1_FC_PWR_MGT_MASK_MASK 0x00000010 /* Description TX_FES_SETUP_1_FC_MORE_DATA_MASK Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. TX_PCU has the abilty of overwrite the More data field, based on the Set_fc_more_data field in the PPDU_SS_... TLVs given by PDG. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_more_data_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_FC_MORE_DATA_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_MORE_DATA_MASK_LSB 5 #define TX_FES_SETUP_1_FC_MORE_DATA_MASK_MASK 0x00000020 /* Description TX_FES_SETUP_1_FC_PROT_FRAME_MASK Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the setting for the Protected frame bit on the key_type setting in the peer entry. When NO encryption is needed, the bit will be set to 0, When the any encryption is needed, the bit will be set to 0. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_prot_frame_setting. When fc_prot_frame_setting is set, OLE will encrypt the frame, based on the encryption type indicate with the key_type setting in the peer entry : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_FC_PROT_FRAME_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_PROT_FRAME_MASK_LSB 6 #define TX_FES_SETUP_1_FC_PROT_FRAME_MASK_MASK 0x00000040 /* Description TX_FES_SETUP_1_FC_ORDER_MASK Field only valid for MSDU frames with enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will get the setting from the frame_ctl field in the MPDU_queue extension data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: fc_order_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_FC_ORDER_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_ORDER_MASK_LSB 7 #define TX_FES_SETUP_1_FC_ORDER_MASK_MASK 0x00000080 /* Description TX_FES_SETUP_1_DURATION_FIELD_MASK Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, TX PCU will get the value for this field from the Duration fields in the PPDU_SS_... TLVs from PDG. : HW is allowed to update this field. The value that HW (TX_PCU) will insert is coming from the Duration fields in the PPDU_SS_... TLVs from PDG (similar as with NON RAW/Native WiFi frames). : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_DURATION_FIELD_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_DURATION_FIELD_MASK_LSB 8 #define TX_FES_SETUP_1_DURATION_FIELD_MASK_MASK 0x00000100 /* Description TX_FES_SETUP_1_SEQUENCE_CONTROL_MASK Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the start_seq_num and seqnum_bitmap_31_0, seqnum_bitmap_63_32 fields from the mpdu_queue_ext datastructure. : HW is allowed to update this field. The value that HW (OLE) will insert is the same as with NON RAW/Native WiFi frames (see description above). : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_SEQUENCE_CONTROL_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_SEQUENCE_CONTROL_MASK_LSB 9 #define TX_FES_SETUP_1_SEQUENCE_CONTROL_MASK_MASK 0x00000200 /* Description TX_FES_SETUP_1_QC_TID_MASK Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. : HW is allowed to update this field. The value that HW (OLE) will insert is the given in field: qc_tid_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_QC_TID_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_QC_TID_MASK_LSB 10 #define TX_FES_SETUP_1_QC_TID_MASK_MASK 0x00000400 /* Description TX_FES_SETUP_1_QC_EOSP_MASK Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. TX_PCU has the abilty of overwrite the QoS eosp field, based on the Set_fc_more_data field in the PPDU_SS_... TLVs given by PDG. : HW is allowed to update the QoS eosp field. The value that HW (OLE) will insert is the given in field: qc_eosp_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_QC_EOSP_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_QC_EOSP_MASK_LSB 11 #define TX_FES_SETUP_1_QC_EOSP_MASK_MASK 0x00000800 /* Description TX_FES_SETUP_1_QC_ACK_POLICY_MASK Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. : HW is allowed to update the QoS ack policy field. The value that HW (OLE) will insert is determined by field: qc_ack_pol_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_QC_ACK_POLICY_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_QC_ACK_POLICY_MASK_LSB 12 #define TX_FES_SETUP_1_QC_ACK_POLICY_MASK_MASK 0x00001000 /* Description TX_FES_SETUP_1_QC_AMSDU_MASK Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. : HW is allowed to update the QoS amsdu field. The value that HW (OLE) will insert is determined by field: qc_amsdu_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_QC_AMSDU_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_QC_AMSDU_MASK_LSB 13 #define TX_FES_SETUP_1_QC_AMSDU_MASK_MASK 0x00002000 /* Description TX_FES_SETUP_1_RESERVED_1 */ #define TX_FES_SETUP_1_RESERVED_1_OFFSET 0x00000004 #define TX_FES_SETUP_1_RESERVED_1_LSB 14 #define TX_FES_SETUP_1_RESERVED_1_MASK 0x00004000 /* Description TX_FES_SETUP_1_QC_15TO8_MASK Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the value for this field on the qos_ctl field from the MPDU_queue_ext data structure. : HW is allowed to update the QoS control field, bits 15-8. The value that HW (OLE) will insert is determined by field: qc_15to8_setting. : HW is not allowed to update the contents of this field. */ #define TX_FES_SETUP_1_QC_15TO8_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_QC_15TO8_MASK_LSB 15 #define TX_FES_SETUP_1_QC_15TO8_MASK_MASK 0x00008000 /* Description TX_FES_SETUP_1_IV_MASK Field only valid for MPDU frames with MSDU enc_type == RAW or Native WiFi Note: When enc_type != RAW or Native WiFi, OLE will base the IV field insertion/value on the on the encryption type indicate with the key_type setting in the peer entry : OLE is allowed to overwrite the IV field, in case key_type setting in the peer entry indicates some encryption. : OLE is not allowed to overwrite any of the IV field contents. */ #define TX_FES_SETUP_1_IV_MASK_OFFSET 0x00000004 #define TX_FES_SETUP_1_IV_MASK_LSB 16 #define TX_FES_SETUP_1_IV_MASK_MASK 0x00010000 /* Description TX_FES_SETUP_1_FC_TO_DS_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_to_ds_mask is not set. : OLE will set the frame control field, to ds bit to 0 : OLE will set the frame control field, to ds bit to 1 */ #define TX_FES_SETUP_1_FC_TO_DS_SETTING_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_TO_DS_SETTING_LSB 17 #define TX_FES_SETUP_1_FC_TO_DS_SETTING_MASK 0x00020000 /* Description TX_FES_SETUP_1_FC_FROM_DS_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_from_ds_mask is not set. : OLE will set the frame control field, from ds bit to 0 : OLE will set the frame control field, from ds bit to 1 */ #define TX_FES_SETUP_1_FC_FROM_DS_SETTING_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_FROM_DS_SETTING_LSB 18 #define TX_FES_SETUP_1_FC_FROM_DS_SETTING_MASK 0x00040000 /* Description TX_FES_SETUP_1_FC_MORE_FRAG_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_more_frag_mask is not set. : OLE will set the frame control field, more frag bit to 0 : OLE will set the frame control field, more frag bit to 1 */ #define TX_FES_SETUP_1_FC_MORE_FRAG_SETTING_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_MORE_FRAG_SETTING_LSB 19 #define TX_FES_SETUP_1_FC_MORE_FRAG_SETTING_MASK 0x00080000 /* Description TX_FES_SETUP_1_FC_RETRY_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_retry_mask is not set. : OLE will set the frame control field, retry bit to 0 : OLE will set the frame control field, retry bit to 1 : OLE will base the setting for this field on the retry_bitmap_31_0 and retry_bitmap_63_32 fields in the MPDU_queue_extension descriptor */ #define TX_FES_SETUP_1_FC_RETRY_SETTING_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_RETRY_SETTING_LSB 20 #define TX_FES_SETUP_1_FC_RETRY_SETTING_MASK 0x00300000 /* Description TX_FES_SETUP_1_FC_PWR_MGT_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_pwr_mgt_mask is not set. : OLE will set the frame control field, pwr_mgt bit to 0 : OLE will set the frame control field, pwr_mgt bit to 1 */ #define TX_FES_SETUP_1_FC_PWR_MGT_SETTING_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_PWR_MGT_SETTING_LSB 22 #define TX_FES_SETUP_1_FC_PWR_MGT_SETTING_MASK 0x00400000 /* Description TX_FES_SETUP_1_FC_MORE_DATA_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_more_Data_mask is not set. : OLE will set the frame control field, More data bit to 0 : OLE will set the frame control field, More data bit to 1 : OLE will set the Frame control, More data bit to 0, but TX_PCU has the abilty to overwrite this based on the Set_fc_more_data field in the PPDU_SS_... TLVs given by PDG. */ #define TX_FES_SETUP_1_FC_MORE_DATA_SETTING_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_MORE_DATA_SETTING_LSB 23 #define TX_FES_SETUP_1_FC_MORE_DATA_SETTING_MASK 0x01800000 /* Description TX_FES_SETUP_1_FC_PROT_FRAME_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_prot_frame_mask is not set. : OLE will set the frame control field , order bit to 0 : OLE will set the frame control field , order bit to 1 : OLE configures the Frame Control field, Prot frame bit according to the following rule: When the encryption type indicated with the key_type setting in the peer entry is set to no crypto, the fc prot_frame bit is set to zero. When the encryption type indicated with the key_type setting in the peer entry is set to some encryption type, the OLE will encrypt the frame AND set the fc prot frame bit to 1. */ #define TX_FES_SETUP_1_FC_PROT_FRAME_SETTING_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_PROT_FRAME_SETTING_LSB 25 #define TX_FES_SETUP_1_FC_PROT_FRAME_SETTING_MASK 0x06000000 /* Description TX_FES_SETUP_1_FC_ORDER_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Fc_order_mask is not set. : OLE will set the frame control field , order bit to 0 : OLE will set the frame control field , order bit to 1 */ #define TX_FES_SETUP_1_FC_ORDER_SETTING_OFFSET 0x00000004 #define TX_FES_SETUP_1_FC_ORDER_SETTING_LSB 27 #define TX_FES_SETUP_1_FC_ORDER_SETTING_MASK 0x08000000 /* Description TX_FES_SETUP_1_QC_TID_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_tid_mask is not set. OLE sets the TID field in the QoS control field to this value. */ #define TX_FES_SETUP_1_QC_TID_SETTING_OFFSET 0x00000004 #define TX_FES_SETUP_1_QC_TID_SETTING_LSB 28 #define TX_FES_SETUP_1_QC_TID_SETTING_MASK 0xf0000000 /* Description TX_FES_SETUP_2_QC_EOSP_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_eosp_mask is not set. : OLE will set the QoS control bit to 0 : OLE will set the QoS control bit to 1 : OLE will set the QoS control bit to 0, but TX_PCU has the abilty of overwrite the QoS eosp field, based on the Set_fc_more_data field in the PPDU_SS_... TLVs given by PDG. */ #define TX_FES_SETUP_2_QC_EOSP_SETTING_OFFSET 0x00000008 #define TX_FES_SETUP_2_QC_EOSP_SETTING_LSB 0 #define TX_FES_SETUP_2_QC_EOSP_SETTING_MASK 0x00000003 /* Description TX_FES_SETUP_2_QC_ACK_POLICY_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_ack_policy_mask is not set. : OLE will set the QoS control field ack policy bit to 0 : OLE will set the QoS control ack policy bit to 1 */ #define TX_FES_SETUP_2_QC_ACK_POLICY_SETTING_OFFSET 0x00000008 #define TX_FES_SETUP_2_QC_ACK_POLICY_SETTING_LSB 2 #define TX_FES_SETUP_2_QC_ACK_POLICY_SETTING_MASK 0x00000004 /* Description TX_FES_SETUP_2_QC_AMSDU_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_amsdu_mask is not set. : OLE will set the QoS control field amsdu bit to 0 : OLE will set the QoS control field amsdu bit to 1 */ #define TX_FES_SETUP_2_QC_AMSDU_SETTING_OFFSET 0x00000008 #define TX_FES_SETUP_2_QC_AMSDU_SETTING_LSB 3 #define TX_FES_SETUP_2_QC_AMSDU_SETTING_MASK 0x00000008 /* Description TX_FES_SETUP_2_QC_15TO8_SETTING Field only valid for MSDU frames with enc_type == RAW or Native WiFi. Field only valid when field Qc_15to8_mask is not set. OLE sets bit 8 to 16 in the QoS control field to this value. */ #define TX_FES_SETUP_2_QC_15TO8_SETTING_OFFSET 0x00000008 #define TX_FES_SETUP_2_QC_15TO8_SETTING_LSB 4 #define TX_FES_SETUP_2_QC_15TO8_SETTING_MASK 0x00000ff0 /* Description TX_FES_SETUP_2_RAW_ALREADY_ENCRYPTED If set it indicates that the RAW MPDU has already been encrypted and does not require HW encryption. If clear and if the frame control indicates that this is a protected MPDU and the peer key type indicates a cipher type then the HW is expected to encrypt this packet. */ #define TX_FES_SETUP_2_RAW_ALREADY_ENCRYPTED_OFFSET 0x00000008 #define TX_FES_SETUP_2_RAW_ALREADY_ENCRYPTED_LSB 12 #define TX_FES_SETUP_2_RAW_ALREADY_ENCRYPTED_MASK 0x00001000 /* Description TX_FES_SETUP_2_ALLOW_TXOP_EXCEED_IN_1ST_PKT If set, the single MPDU after RBO is allowed to exceed TXOP. If clear, single MPDU after RBO is not allowed to exceed TXOP. */ #define TX_FES_SETUP_2_ALLOW_TXOP_EXCEED_IN_1ST_PKT_OFFSET 0x00000008 #define TX_FES_SETUP_2_ALLOW_TXOP_EXCEED_IN_1ST_PKT_LSB 13 #define TX_FES_SETUP_2_ALLOW_TXOP_EXCEED_IN_1ST_PKT_MASK 0x00002000 /* Description TX_FES_SETUP_2_MPROT_ADDR_SEL If set, address 1/2 of protection frame (RTS and CTS2Self) will be taken directly from address 1/2 of USER0 PPDU frame. If clear, address 1/2 of protection frame will be come from mac_addr_a/b/c fields of peer_entry. */ #define TX_FES_SETUP_2_MPROT_ADDR_SEL_OFFSET 0x00000008 #define TX_FES_SETUP_2_MPROT_ADDR_SEL_LSB 14 #define TX_FES_SETUP_2_MPROT_ADDR_SEL_MASK 0x00004000 /* Description TX_FES_SETUP_2_IGNORE_BW_AVAILABLE If set, TXPCU ignores 'BW available signals' from the scheduler and transmit using the single BW that SW has programmed the transmission to go out in. This bit should be set for SIFS response frame to PS-Poll/uAPSD/QBoost and note that for this mode, SW is only allowed to program a single transmit BW. */ #define TX_FES_SETUP_2_IGNORE_BW_AVAILABLE_OFFSET 0x00000008 #define TX_FES_SETUP_2_IGNORE_BW_AVAILABLE_LSB 15 #define TX_FES_SETUP_2_IGNORE_BW_AVAILABLE_MASK 0x00008000 /* Description TX_FES_SETUP_2_FES_TIME_20MHZ Field only valid if FES_control_mode is set to SW_transmit_mode The amount of time (in us) the SW defined frame exchange sequence takes when transmission BW is 20 Mhz. If this bandwidth is not supported, SW should program the value in this field equal to the smallest of valid Fes_time_40MHz or Fes_time_80Mhz fields. Used by TX PCU to confirm that transmission will fit in available TXOP time */ #define TX_FES_SETUP_2_FES_TIME_20MHZ_OFFSET 0x00000008 #define TX_FES_SETUP_2_FES_TIME_20MHZ_LSB 16 #define TX_FES_SETUP_2_FES_TIME_20MHZ_MASK 0xffff0000 /* Description TX_FES_SETUP_3_FES_TIME_40MHZ Field only valid if FES_control_mode is set to SW_transmit_mode The amount of time (in us) the SW defined frame exchange sequence takes when transmission BW is 40 Mhz. If this bandwidth is not supported, SW should program the value in this field equal to the smallest of valid Fes_time_20MHz or Fes_time_80Mhz fields. Used by TX PCU to confirm that transmission will fit in available TXOP time */ #define TX_FES_SETUP_3_FES_TIME_40MHZ_OFFSET 0x0000000c #define TX_FES_SETUP_3_FES_TIME_40MHZ_LSB 0 #define TX_FES_SETUP_3_FES_TIME_40MHZ_MASK 0x0000ffff /* Description TX_FES_SETUP_3_FES_TIME_80MHZ Field only valid if FES_control_mode is set to SW_transmit_mode The amount of time (in us) the SW defined frame exchange sequence takes when transmission BW is 80 Mhz. If this bandwidth is not supported, SW should program the value in this field equal to the smallest of valid Fes_time_20MHz or Fes_time_40Mhz fields. Used by TX PCU to confirm that transmission will fit in available TXOP time */ #define TX_FES_SETUP_3_FES_TIME_80MHZ_OFFSET 0x0000000c #define TX_FES_SETUP_3_FES_TIME_80MHZ_LSB 16 #define TX_FES_SETUP_3_FES_TIME_80MHZ_MASK 0xffff0000 /* Description TX_FES_SETUP_4_MAX_TXOP_TIME Field only valid if FES_control_mode is set to SW_transmit_mode The maximum TXOP time (in us) allowed for the upcoming Frame Exchange Sequence (FES) in SW transmit mode. Scheduler determines this field based on all TXOP related boundary checks. This field is used by TX PCU to confirm that the upcoming transmission (after BW selection result is known) will within this time. The max_txop_time is used for a SIFS burst of transmit packets. It may include time reservation for multiple FES. Allowed transmit time needs to have room for 4us extra, in case an extra symbol is needed for LDPC. */ #define TX_FES_SETUP_4_MAX_TXOP_TIME_OFFSET 0x00000010 #define TX_FES_SETUP_4_MAX_TXOP_TIME_LSB 0 #define TX_FES_SETUP_4_MAX_TXOP_TIME_MASK 0x0000ffff /* Description TX_FES_SETUP_4_RESERVED_4 */ #define TX_FES_SETUP_4_RESERVED_4_OFFSET 0x00000010 #define TX_FES_SETUP_4_RESERVED_4_LSB 16 #define TX_FES_SETUP_4_RESERVED_4_MASK 0x001f0000 /* Description TX_FES_SETUP_4_PEER_IDX Used for implicit BF sounding capture on receive Ack/BA. The RXPCU needs to tag the receive sounding with peer_idx so FW will know which STA is associated with Ack/BA sounding. */ #define TX_FES_SETUP_4_PEER_IDX_OFFSET 0x00000010 #define TX_FES_SETUP_4_PEER_IDX_LSB 21 #define TX_FES_SETUP_4_PEER_IDX_MASK 0xffe00000 /* Description TX_FES_SETUP_5_NUM_SS_USER0 Part of TX_BF_PARAMS: Number of spatial streams assigned to user 0 in the next MU MIMO packet or the number of streams in the next SU packet. For MU packets the values can be 1 or 2, for SU packets the value can be 1, 2, or 3 */ #define TX_FES_SETUP_5_NUM_SS_USER0_OFFSET 0x00000014 #define TX_FES_SETUP_5_NUM_SS_USER0_LSB 0 #define TX_FES_SETUP_5_NUM_SS_USER0_MASK 0x00000007 /* Description TX_FES_SETUP_5_NUM_SS_USER1 Part of TX_BF_PARAMS: Number of spatial streams assigned to user 1 in the next MIMO packet. */ #define TX_FES_SETUP_5_NUM_SS_USER1_OFFSET 0x00000014 #define TX_FES_SETUP_5_NUM_SS_USER1_LSB 3 #define TX_FES_SETUP_5_NUM_SS_USER1_MASK 0x00000038 /* Description TX_FES_SETUP_5_NUM_SS_USER2 Part of TX_BF_PARAMS: Number of spatial streams assigned to user 2 in the next MIMO packet. */ #define TX_FES_SETUP_5_NUM_SS_USER2_OFFSET 0x00000014 #define TX_FES_SETUP_5_NUM_SS_USER2_LSB 6 #define TX_FES_SETUP_5_NUM_SS_USER2_MASK 0x000001c0 /* Description TX_FES_SETUP_5_USE_STATIC_BW Part of TX_BF_PARAMS: This field is used to indicate to the SVD that the b/w that will be defined in the TX_PHY_DESC for the upcoming TXBF packet will be the same as the static bandwidth, i.e. the bandwidth that was in operation during sounding for the clients in question */ #define TX_FES_SETUP_5_USE_STATIC_BW_OFFSET 0x00000014 #define TX_FES_SETUP_5_USE_STATIC_BW_LSB 9 #define TX_FES_SETUP_5_USE_STATIC_BW_MASK 0x00000200 /* Description TX_FES_SETUP_5_STATIC_BANDWIDTH Part of TX_BF_PARAMS: Packet bandwidth when use_static_bw is set: Not supported Field is reserved when use_static_bw is clear. */ #define TX_FES_SETUP_5_STATIC_BANDWIDTH_OFFSET 0x00000014 #define TX_FES_SETUP_5_STATIC_BANDWIDTH_LSB 10 #define TX_FES_SETUP_5_STATIC_BANDWIDTH_MASK 0x00000c00 /* Description TX_FES_SETUP_5_CBF_USER_NUMBER This field is only valid when expect_cbf is set. This field is inserted into the TX_EXPECT_CBF TLV generated by the TX PCU. Defines the source of the expected CBF. */ #define TX_FES_SETUP_5_CBF_USER_NUMBER_OFFSET 0x00000014 #define TX_FES_SETUP_5_CBF_USER_NUMBER_LSB 12 #define TX_FES_SETUP_5_CBF_USER_NUMBER_MASK 0x00003000 /* Description TX_FES_SETUP_5_CV_ID This field is only valid when expect_cbf is set. A unique ID corresponding to the CV data expected from the CBF frame. TXPCU copies this field over to the TX_FES_STATUS TLV */ #define TX_FES_SETUP_5_CV_ID_OFFSET 0x00000014 #define TX_FES_SETUP_5_CV_ID_LSB 14 #define TX_FES_SETUP_5_CV_ID_MASK 0x003fc000 /* Description TX_FES_SETUP_5_FRAME_TYPE (Not supported in Beeliner) Frame type indication. Indicates what type of frame is being sent. Supported values: 0: default 1: PS-Poll 2-7: Reserved */ #define TX_FES_SETUP_5_FRAME_TYPE_OFFSET 0x00000014 #define TX_FES_SETUP_5_FRAME_TYPE_LSB 22 #define TX_FES_SETUP_5_FRAME_TYPE_MASK 0x01c00000 /* Description TX_FES_SETUP_5_TX_CHAIN_MASK Tx chain mask to support up to 4 antennas. This field is used for VECTOR_TRANSFER_START and TX_CBF_OFFSET. */ #define TX_FES_SETUP_5_TX_CHAIN_MASK_OFFSET 0x00000014 #define TX_FES_SETUP_5_TX_CHAIN_MASK_LSB 25 #define TX_FES_SETUP_5_TX_CHAIN_MASK_MASK 0x1e000000 /* Description TX_FES_SETUP_5_BF_TYPE Defines the type of beamforming that is required using this CV data This field is used for TXPCU to construct VECTOR_TRANSFER_START. */ #define TX_FES_SETUP_5_BF_TYPE_OFFSET 0x00000014 #define TX_FES_SETUP_5_BF_TYPE_LSB 29 #define TX_FES_SETUP_5_BF_TYPE_MASK 0x60000000 /* Description TX_FES_SETUP_5_SEND_TX_BF_PARAMS If set indicates that the TXPCU should send the TX_BF_PARAMS associated with this FES. If send_tx_expect_cbf is set then the tx_bf_params would be sent after TXPCU sends the TX_CBF_OFFSET TLV. If txbf is set then the tx_bf_params is sent as soon as possible after the VECTOR_TRANSFER_START. For the case of MU, the TX_BF_PARAMS is sent as soon as possible after the last VECTOR_TRANSFER_START. */ #define TX_FES_SETUP_5_SEND_TX_BF_PARAMS_OFFSET 0x00000014 #define TX_FES_SETUP_5_SEND_TX_BF_PARAMS_LSB 31 #define TX_FES_SETUP_5_SEND_TX_BF_PARAMS_MASK 0x80000000 /* Description TX_FES_SETUP_6_CBF_NC_INDEX Expected Nc_index of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_nc_index_mask is set to 1. */ #define TX_FES_SETUP_6_CBF_NC_INDEX_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_NC_INDEX_LSB 0 #define TX_FES_SETUP_6_CBF_NC_INDEX_MASK 0x00000007 /* Description TX_FES_SETUP_6_CBF_NC_INDEX_MASK Mask bit for cbf_nc_index */ #define TX_FES_SETUP_6_CBF_NC_INDEX_MASK_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_NC_INDEX_MASK_LSB 3 #define TX_FES_SETUP_6_CBF_NC_INDEX_MASK_MASK 0x00000008 /* Description TX_FES_SETUP_6_CBF_NR_INDEX Expected Nr_index of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_nr_index_mask is set to 1. */ #define TX_FES_SETUP_6_CBF_NR_INDEX_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_NR_INDEX_LSB 4 #define TX_FES_SETUP_6_CBF_NR_INDEX_MASK 0x00000070 /* Description TX_FES_SETUP_6_CBF_NR_INDEX_MASK Mask bit for cbf_nr_index */ #define TX_FES_SETUP_6_CBF_NR_INDEX_MASK_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_NR_INDEX_MASK_LSB 7 #define TX_FES_SETUP_6_CBF_NR_INDEX_MASK_MASK 0x00000080 /* Description TX_FES_SETUP_6_CBF_BW Expected channel width of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_bw_mask is set to 1. Not supported */ #define TX_FES_SETUP_6_CBF_BW_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_BW_LSB 8 #define TX_FES_SETUP_6_CBF_BW_MASK 0x00000300 /* Description TX_FES_SETUP_6_CBF_BW_MASK Mask bit for cbf_bw */ #define TX_FES_SETUP_6_CBF_BW_MASK_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_BW_MASK_LSB 10 #define TX_FES_SETUP_6_CBF_BW_MASK_MASK 0x00000400 /* Description TX_FES_SETUP_6_CBF_FEEDBACK_TYPE Expected feedback type of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_feedback_type_mask is set to 1. */ #define TX_FES_SETUP_6_CBF_FEEDBACK_TYPE_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_FEEDBACK_TYPE_LSB 11 #define TX_FES_SETUP_6_CBF_FEEDBACK_TYPE_MASK 0x00000800 /* Description TX_FES_SETUP_6_CBF_FEEDBACK_TYPE_MASK Mask bit for cbf_feedback_type */ #define TX_FES_SETUP_6_CBF_FEEDBACK_TYPE_MASK_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_FEEDBACK_TYPE_MASK_LSB 12 #define TX_FES_SETUP_6_CBF_FEEDBACK_TYPE_MASK_MASK 0x00001000 /* Description TX_FES_SETUP_6_CBF_SOUNDING_TOKEN Expected sounding token of received CBF frame after sending NDP or BR-Poll. This field is compared only if cbf_sounding_token_mask is set to 1. */ #define TX_FES_SETUP_6_CBF_SOUNDING_TOKEN_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_SOUNDING_TOKEN_LSB 13 #define TX_FES_SETUP_6_CBF_SOUNDING_TOKEN_MASK 0x0007e000 /* Description TX_FES_SETUP_6_CBF_SOUNDING_TOKEN_MASK Mask bit for cbf_sounding_token */ #define TX_FES_SETUP_6_CBF_SOUNDING_TOKEN_MASK_OFFSET 0x00000018 #define TX_FES_SETUP_6_CBF_SOUNDING_TOKEN_MASK_LSB 19 #define TX_FES_SETUP_6_CBF_SOUNDING_TOKEN_MASK_MASK 0x00080000 /* Description TX_FES_SETUP_6_TXBF_PER_PACKET_NO_CSD_NO_WALSH If set, no_csd and no_walsh is applied to steering packet. TXPCU copies this field to VECTOR_FRAGMENT_START TLV and TX_PHY_DESC TLV. */ #define TX_FES_SETUP_6_TXBF_PER_PACKET_NO_CSD_NO_WALSH_OFFSET 0x00000018 #define TX_FES_SETUP_6_TXBF_PER_PACKET_NO_CSD_NO_WALSH_LSB 20 #define TX_FES_SETUP_6_TXBF_PER_PACKET_NO_CSD_NO_WALSH_MASK 0x00100000 /* Description TX_FES_SETUP_6_IGNORE_TBTT If set, PDG ignores remaining TBTTs in PPDU time calculation. */ #define TX_FES_SETUP_6_IGNORE_TBTT_OFFSET 0x00000018 #define TX_FES_SETUP_6_IGNORE_TBTT_LSB 21 #define TX_FES_SETUP_6_IGNORE_TBTT_MASK 0x00200000 /* Description TX_FES_SETUP_6_RESERVED_6 Reserved - MAC to set this field to 0, PHY to ignore this field. */ #define TX_FES_SETUP_6_RESERVED_6_OFFSET 0x00000018 #define TX_FES_SETUP_6_RESERVED_6_LSB 22 #define TX_FES_SETUP_6_RESERVED_6_MASK 0xffc00000 #endif // _TX_FES_SETUP_H_