// Copyright (c) 2013 Qualcomm Atheros, Inc. All rights reserved. // $ATH_LICENSE_HW_HDR_C$ // // DO NOT EDIT! This file is automatically generated // These definitions are tied to a particular hardware layout #ifndef _TX_CV_START_REFX_H_ #define _TX_CV_START_REFX_H_ #if !defined(__ASSEMBLER__) #endif // ################ START SUMMARY ################# // // Dword Fields // 0 reserved_0a[0], forced_cv_mem_fetch[1], forced_phy_cv_location[2], user_num[4:3], reserved_0b[7:5], cv_id[15:8], cv_size[31:16] // 1 cv_address[31:0] // // ################ END SUMMARY ################# #define NUM_OF_DWORDS_TX_CV_START_REFX 2 struct tx_cv_start_refx { volatile uint32_t reserved_0a : 1, //[0] forced_cv_mem_fetch : 1, //[1] forced_phy_cv_location : 1, //[2] user_num : 2, //[4:3] reserved_0b : 3, //[7:5] cv_id : 8, //[15:8] cv_size : 16; //[31:16] volatile uint32_t cv_address : 32; //[31:0] }; /* reserved_0a When set, usage of CV data is required, for either MU-MIMO transmission or SU beam forming. forced_cv_mem_fetch When set, the cv data shall be fetched from memory, irrespective of what is already present inside the PHY forced_phy_cv_location When set, the cv data shall be located in the location indicated by user_num When this field is not set, the scheduler can determine the user_num based on it's own user_num assignment logic. user_num Field only valid when forced_phy_cv_Location is set. When Indicates the position that this CV will be stored in the PHY. 0 corresponds to user 0 position, 1 corresponds to user 1 position, 2 corresponds to user 2 position. Field only valid when forced_phy_cv_Location is set. When reserved_0b 0 cv_id A unique ID corresponding to the CV data. When cv_mem_fetch is set, this will be the cv_id the scheduler will link to the new CV data written into cv_position. When cv_mem_fetch is NOT set, the scheduler can check if this cv_id is equal to the cv_id that scheduler remembers is already present in the PHY at cv_position. cv_size Size of the CV in units of octets cv_address The physical address of the CV data in memory. */ /* Description TX_CV_START_REFX_0_RESERVED_0A When set, usage of CV data is required, for either MU-MIMO transmission or SU beam forming. */ #define TX_CV_START_REFX_0_RESERVED_0A_OFFSET 0x00000000 #define TX_CV_START_REFX_0_RESERVED_0A_LSB 0 #define TX_CV_START_REFX_0_RESERVED_0A_MASK 0x00000001 /* Description TX_CV_START_REFX_0_FORCED_CV_MEM_FETCH When set, the cv data shall be fetched from memory, irrespective of what is already present inside the PHY */ #define TX_CV_START_REFX_0_FORCED_CV_MEM_FETCH_OFFSET 0x00000000 #define TX_CV_START_REFX_0_FORCED_CV_MEM_FETCH_LSB 1 #define TX_CV_START_REFX_0_FORCED_CV_MEM_FETCH_MASK 0x00000002 /* Description TX_CV_START_REFX_0_FORCED_PHY_CV_LOCATION When set, the cv data shall be located in the location indicated by user_num When this field is not set, the scheduler can determine the user_num based on it's own user_num assignment logic. */ #define TX_CV_START_REFX_0_FORCED_PHY_CV_LOCATION_OFFSET 0x00000000 #define TX_CV_START_REFX_0_FORCED_PHY_CV_LOCATION_LSB 2 #define TX_CV_START_REFX_0_FORCED_PHY_CV_LOCATION_MASK 0x00000004 /* Description TX_CV_START_REFX_0_USER_NUM Field only valid when forced_phy_cv_Location is set. When Indicates the position that this CV will be stored in the PHY. 0 corresponds to user 0 position, 1 corresponds to user 1 position, 2 corresponds to user 2 position. Field only valid when forced_phy_cv_Location is set. When */ #define TX_CV_START_REFX_0_USER_NUM_OFFSET 0x00000000 #define TX_CV_START_REFX_0_USER_NUM_LSB 3 #define TX_CV_START_REFX_0_USER_NUM_MASK 0x00000018 /* Description TX_CV_START_REFX_0_RESERVED_0B 0 */ #define TX_CV_START_REFX_0_RESERVED_0B_OFFSET 0x00000000 #define TX_CV_START_REFX_0_RESERVED_0B_LSB 5 #define TX_CV_START_REFX_0_RESERVED_0B_MASK 0x000000e0 /* Description TX_CV_START_REFX_0_CV_ID A unique ID corresponding to the CV data. When cv_mem_fetch is set, this will be the cv_id the scheduler will link to the new CV data written into cv_position. When cv_mem_fetch is NOT set, the scheduler can check if this cv_id is equal to the cv_id that scheduler remembers is already present in the PHY at cv_position. */ #define TX_CV_START_REFX_0_CV_ID_OFFSET 0x00000000 #define TX_CV_START_REFX_0_CV_ID_LSB 8 #define TX_CV_START_REFX_0_CV_ID_MASK 0x0000ff00 /* Description TX_CV_START_REFX_0_CV_SIZE Size of the CV in units of octets */ #define TX_CV_START_REFX_0_CV_SIZE_OFFSET 0x00000000 #define TX_CV_START_REFX_0_CV_SIZE_LSB 16 #define TX_CV_START_REFX_0_CV_SIZE_MASK 0xffff0000 /* Description TX_CV_START_REFX_1_CV_ADDRESS The physical address of the CV data in memory. */ #define TX_CV_START_REFX_1_CV_ADDRESS_OFFSET 0x00000004 #define TX_CV_START_REFX_1_CV_ADDRESS_LSB 0 #define TX_CV_START_REFX_1_CV_ADDRESS_MASK 0xffffffff #endif // _TX_CV_START_REFX_H_